Remove/install rear side window

AR67.30-P-4000SC

Remove/install rear side window

11.9.06



Removing

1

Remove paneling (2) on left and right side paneling in rear.

AR68.30-P-4780SC

2

Pull damping mat to side (3) and expose damping material (4) in area shown.

3

Separate prepunched covers from damping material (4).

4

Lower rear side window (1).

5

Loosen outer section of sealing rail from side wall.

 It is not necessary to remove rear side paneling.

AR67.30-P-4070SC

6

Mask off upper edge of side wall and trim strip with suitable textile adhesive tape.

7

Raise rear side window (1) until bolts (5, 6) above access opening are accessible.

8

Unscrew bolts (5, 6)

 Secure bolts (5, 6) against falling down.

9

Carefully remove rear side window (1) from side wall.

 Carefully remove rear side window (1) to prevent damaging rear side window (1).



Install

10

Insert rear side window (1) into mounts on power window and screw in bolts (5, 6) up to stop.

 Carefully install rear side window (1) in side wall to prevent damaging rear side window (1).

 The pins (7) should be seated in the corresponding cutouts in the mounts on the power window.

11

Install outer section of side wall sealing rail.

AR67.30-P-4070SC

12

Adjust rear side window (1).

AR67.30-P-4200SC