Adjust pretension at front side window

AR67.30-P-0100-02FR

Adjust pretension at front side window

Model

257, 290

Side window(s)

Number

Designation

Model 257.3

Model 290

BE67.30-P-1003-03E

Transition between front door side window and B-pillar cover

Dimension "c"

mm

0 (+1/-0,5)

0 (+1/-0,5)

1

Move front door to first lock catch.

2

Check for contact of the window edge of the front side window (1) with the seal (9).

 Window edge of front side window (1) must just be in contact with seal in upper area (arrow) (9).

If there is a problem,



adjust front side window (1) to the seal (9).

3

Open front door.

4

Release nut (10) with the  socket wrench and with the  socket wrench socket and adjust the preload of the front side window (1) by turning the setting screw (11).

 Turn setting screw (11) only until the adjustment force increases noticeably. Max. adjustment range is thus achieved. Do not continue turning setting screw (11).
Thread will otherwise be damaged.

 Do not unscrew nut (10) from the setting screw (11).
Otherwise the adjustment screw (11) can be pressed behind the door module and can no longer be reached.

 Turning the setting screw (11) counterclockwise increases ("+") preload of the front side window (1).
Turning the setting screw (11) clockwise reduces ("­") preload of the front side window (1).

5

Move front door to first lock catch.

6

Check for contact of the window edge of the front side window (1) with the seal (9).

If there is a problem,



Adjust once again front side window (1).

7

Open front door.

8

Tighten nut (10) with the  socket wrench and with the  socket wrench socket.

 When tightening nut (10), setting screw (11) may not turn; adjustment must otherwise be repeated.

9

Unhook molded part of the seal (9) at the bottom from the B-pillar cover (2).

10

Loosen screw (12).

11

Adjust dimension (c) by turning the sleeve (13).  

 Turning the sleeve (13) counterclockwise increases ("+") the dimension (c). Turning sleeve (13) clockwise reduces ("­") dimension (c).

12

Tighten screw (12).

13

Hook the molded part of the seal (9) at the bottom onto the B-pillar cover (2).