Adjust rear door side window preload

AR67.30-P-0016-02MFC

Adjust rear door side window preload

Model

118.3/6

Side window(s)

Number

Designation

Model 118

BE67.30-P-1006-03E

Transition between rear door side window and B-pillar cover

Dimension "c"

mm

0,5 (+1/-0,5)

1

Move rear door to the first lock catch.

2

Check for contact of window edge of the rear door side window (1) with seal (2).

  Window edge of rear door side window (1) must just be in contact with seal in upper area (arrow) (2).

If there is a problem,



adjust rear door side window once again (1).

3

Open rear door.

4

Loosen nuts (3) using the  socket wrench and the  socket wrench socket and adjust the preload of the rear door side window (1) by turning the setting screws (4). 

 Turn setting screws (4) only until the adjustment force increases noticeably. The maximum adjustment is reached as a result.  Do not continue turning setting screws (4).
Thread will otherwise be damaged.

 Do not unscrew nuts (3) from the adjustment screws (4).
Otherwise. the adjustment screws (4) could be pressed behind the door module and could then no longer be reached.

 Turning the setting screws (4) counterclockwise increases ("+") the preload of the rear door side window (1).
Turning the setting screws (4) clockwise reduces ("­") preload of the rear door side window (1).

5

Move rear door to the first lock catch.

6

Check for contact of the window edge of the rear door side window (1) with seal (2).

If there is a problem,



adjust rear door side window once again (1).

7

Open rear door.

8

Tighten nuts (3) using the  socket wrench and the  socket wrench socket.

 When tightening nuts (3), the setting screws (4) must not turn. If they do, the adjustment must be repeated.