ar6730d5312f

Remove/install sliding window actuator

Typ ar · temat 67.30 · wersja 0100 · 2013-10-09

Dotyczy: MODEL 909.8

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 67 Szyby i okna › 67.30 Szyby boczne — Seria 909 (modele 8**)

EinPAS 36 Widoczność › 36.15 Szyba szklana/ okno › 36.15.50 Mechanizm szyby — Seria 909 (modele 8**)

AR67.30-D-5312F

Remove/install sliding window actuator

25.09.2013

MODEL

909.8

Remove/install sliding window actuator

1

Actuation element

2

Sliding window

3

Bolts

4

Counterplate

5

Retaining plate

6

Lower guide rail

D67.30-0105-06

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Open left and right sliding window (2) approx. 10 cm

2

Remove screws/bolts (3)

3

Remove actuation element (1) from sliding window (2)


Carefully handle actuation element (1).
Otherwise the actuation element (1) can fall apart.

4

Remove retaining plate (5) with seal from sliding window (2)

Installation: Clean mounting location on sliding window (2).
Check seal in retaining plate (5), replace if necessary.

5

Unclip counterplate (4) upward from guide rail (6)

Installation: Stay (arrow A) on counterplate (4) should reach into the groove (arrow B) on the lower guide rail (6).

6

Install in the reverse order

Powiązane dokumenty