D67.30-0100-09
1 Sliding window
2 Upper window guide rail
5 Actuations
6 Window guide
3 Cap
4 Lower window guide rail
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
| Notes on carrying out repair work in the vehicle interior | ||
1 | Unclip cap (3) and remove | ||
2 | Press both actuations (5) completely together, simultaneously remove window guides (6) from upper window guider ail (2) and lower window guide rail (4) and pivot side window (1) at rear toward inside. | ||
3 | Pivot sliding window (1) at top toward rear, remove at front from upper window guide rail (2) and remove side window (1) | Installation: First insert sliding window (1) into lower window guide rail (4). | |
| Checking | ||
4 | Check components of entire window guide and circumferential seal on sliding window (1) for damage | If damaged, replace defective component. | |
| Clean | ||
5 | Clean running surfaces on upper window guide rail (2), lower window guide rail (4) and guide rails (6) with clean rag, then coat with lubricant. | Antifriction agent | |
6 | Install in the reverse order |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1032-06A | Antifriction agent | A 000 989 08 60 |
Powiązane dokumenty
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.