Prepare side window cutout for installing window

AR67.30-D-2305-01F

Prepare side window cutout for installing window

Model

909.8

Repair materials

Number

Designation

Order number

BR00.45-Z-1079-04A

BETACLEAN 3350, 1000-ml bottle

DOW Service Partner
LLC Service Partner NN
Office 22
Ulitsa Sovkhoznaya, 9B
Nizhny Novgorod, Russia
603074

BR00.45-Z-1080-04A

BETAPRIME 5500, 250-ml bottle

A 008 989 13 71

1

Cut back remaining adhesive bead with felt scraper to a thickness of 1 mm.

2

Remove loose adhesive material.

3

Evacuate soiling on window cutout.

4

Clean bonding area in window cutout and rub dry.

 Use recommended cleaner.
Otherwise required adhesion of the adhesive material is not ensured.

 Do not touch bonding surfaces with bare fingers and they should be free of dust, oil, grease, wax and other adhesive components or dirt residues.
Otherwise the strength of the adhesive connection can be impaired and proper adhesion of the adhesive material is not ensured.

5

Repair paint damage on window cutout not covered by glue with primer.
Use only primer filler and paints approved by Daimler AG:
http://aftersales.mercedes-benz.com

6

Apply primer in gluing area if glue residues are not present.

 Observe processing information from manufacturer.
Otherwise the strength of the adhesive connection can be impaired and proper adhesion of the adhesive material is not ensured.

 If more than 12 hours have expired since cutting back the adhesive bead, apply primer to adhesive bead.
Hold application sponge horizontally (narrow application).