Repair kit for installing windshields, 1-component adhesive
A 000 670 01 00
1
Install 2 cup suction tools to outside of side window (1).
Commercially available devices/tools Cup suction tool/shackle (for removing and installing windows)
Shown on model 907.6 with code W18 (front left sliding window in sidewall/sliding door)
D67.30-A004-05
2
Apply adhesive bead (2) on inside of side window (1).
Glue in side window (1) within 5 min. Otherwise, the adhesive effect will be impaired.
Model 907.6/7/8 with code W18 (Sliding window front left in sidew./sliding door) Model 907.6/7/8 with code W19 (Sliding window front right in sidew./sliding door) Apply upper adhesive bead (2) in equal proportions to the plastic bars and the glass of the side window (1) so that the overlap of the gap is closed. Leaks can occur otherwise.
Model 907.6/7/8 with code W18 (Sliding window front left in sidew./sliding door) Model 907.6/7/8 with code W19 (Sliding window front right in sidew./sliding door) Apply lower adhesive bead (2) onto the plastic bars between the openings (arrows). The openings must not be closed off by the adhesive. If this is not observed, water may collect between the body and the side window (1).
Do not apply adhesive bead (2) too thickly. If this is not observed, the adhesive bead (2) may expand into the visible areas when the side window (1) is glued in.
Commercially available devices/tools Electric or pneumatic squeeze gun
Distance (a) from edge of side window to center of adhesive bead (2) approx. 15 mm. Height of the adhesive bead (2) approx. 8 mm.
3
Pick up side window (1) with cup suction tools, position on spacers, carefully mount and press on.
A helper is required.
Side window (1) must be in contact all round with spacers.
4
Adjust side window (1) with feeler gauge.
Observe the gap dimensions "EC" and/or "IE". Curing time of adhesive material at least 2 h.
