ar6720s514510e

Apply adhesive foil to rear window

Typ ar · temat 67.20 · wersja 0100 · 2016-06-13

Dotyczy: Model 447.8 with code W65 (Tailgate) with code ZK7 (Equipment line MARCO POLO)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 67 Szyby i okna › 67.20 Okno ściany tylnej, szyba tylna — Seria 447 (modele 8**)

EinPAS 36 Widoczność › 36.15 Szyba szklana/ okno › 36.15.42 Szyba tylna — Seria 447 (modele 8**)

AR67.20-S-5145-10E

Apply adhesive foil to rear window

Model

447.8

with code W65 (Tailgate)

with code ZK7 (Equipment line MARCO POLO)

Apply adhesive foil to rear window

S67.20-4521-09

1

Clean rear window (1).

The rear window (1) must absolutely be free of dust and lint. Dust and lint inclusions are visible after bonding and cannot be removed. For this reason pay absolute attention to cleanliness.

2

Determine center of rear window (1) and mark installation dimensions on rear window (1).

Dimensions:
a= 92 cm

3

Moisten bonding surfaces on adhesive foils (2) on rear window (1) with soapy water.

4

Place adhesive foil (2) on rear window (1), align and attach with commercially available squeegee free of bubbles.

Use squeegee to remove bubbles from adhesive foils (2).
Otherwise adhesion problems can occur.

Observe markings.

5

Cut out adhesive foils (2) in area of rear window heater connections (arrows) and attach adhesive foils (2) in areas of rear window heater connections (arrows) without bubbles.

6

Clean rear window (1).