The bonding area must be free of dust and grease.
Otherwise the adhesive force of the adhesive material starts to decrease.
Use only the repair kit specified in the EPC.
1 | Check rear window for existing scratches and damage. |
If a problem occurs, |
|
Replace rear window. |
2 | Fasten electrical lines on inside of rear window with adhesive tape. |
The number of electrical lines varies depending on the vehicle equipment. |
3 | Level remaining adhesive on rear window with suitable scraper down to a height of approx. 2 mm and remove loose remaining adhesive. |
When reusing rear window. |
4 | Repair damaged primer layer on rear window with primer. |
When reusing rear window. |
The primer must flash off for at least 10 min. |
5 | Apply cleaner (activator) in bonding area on rear window and rub dry with dry cloth. |
When replacing rear window. |
6 | Coat bonding area on rear window using primer. |
When replacing rear window. |
The primer must flash off for at least 10 min. |