AR67.20-P-2000-02C | Cutting out rear window with cutter | ||
Danger! | Risk of injury from knife slipping off when clamping it in the multicutter and from glass splinters when cutting out bonded windows | Clamp/unclamp blade only with air supply shut-off. Wear protective gloves and goggles |
124 589 12 63 00
Cutter
Cutter
124 589 03 63 00
Commercially available tools
P67.20-2001-12
1 Clamp blade (124 589 12 63 00) into multi-cutter (1)
(stop dimension a= 20 mm).
2 Moisten whetstone and sharpen both sides of blade with machine switched on.
3 Insert cutter at starting point "A" and cut out window in upper and side area from inside.
4 Turn over hard top.
5 Clamp blade (124 589 03 63 00) into multi-cutter (1).
6 Moisten whetstone and sharpen both sides of blade with machine switched on.
7 Insert cutter at starting point "B" and cut out window in lower area from outside (pull cutter toward body).
8 Insert cutter at starting point "C" and cut out window in lower side area from outside.
If it is not possible to cut all the way through the glue with the blades available use cutting wire.
Powiązane dokumenty
- as6700z000101a Niebezpieczeństwo obrażeń wskutek ześlizgnięcia się noża podczas mocowania w wielofunkcyjnym przyrządzie do cięcia i przez odpryski szkła podczas wycinania wklejanych szyb.