Dotyczy: Model 907.6/7, 910.6 with code W61 (Window in tailgate / Rear hinged doors) Model 907.6/7, 910.6 with code W78 (Window in tailgate or hinged rear door with wipe/wash system)
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
with code W61 (Window in tailgate / Rear hinged doors)
Model
907.6/7, 910.6
with code W78 (Window in tailgate or hinged rear door with wipe/wash system)
Repair materials
Number
Designation
Order number
BR00.45-Z-1180-02A
Repair kit for installing windshields, 1-component adhesive
A 000 670 01 00
1
Remove adhesive residues from rear window.
When reusing rear window.
A maximum of 1 mm of adhesive residue may be left. Pull off loose adhesive material (remaining pieces which are not completely cut off). Prevents leakage.
Model 907.6/7, 910.6 with code H22 (heated rear window) Do not damage conductor tracks on rear window heater. Damage may lead to malfunctions or failure of the rear window heater.
2
Clean rear window with commercially available glass cleaner.
The bonding area on the rear window must be absolutely dry and free of dust and grease. Prevents paint adhesion problems when installing window.
3
Check rear window for damage.
If rear window is damaged
Replace rear window.
4
Clean bonding area on rear window with the cleaner and cleaning cloth contained in the repair kit and rub dry with a dry cloth.
When replacing rear window.
5
Apply primer with slight pressure in one stroke and with sufficient coat thickness to the bonding area on the rear window.
When replacing rear window.
Do not brush on primer and do not apply excessive coat thickness. Observe flash-off time (at least 10 min). Otherwise adhesion problems may occur.