ar6710p100008ff

Apply adhesive material

Typ ar · temat 67.10 · wersja 0105 · 2012-02-28

Dotyczy: MODEL 450.3 /4, 452.3 /4, 454.0 (except , 450.418)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 67 Szyby i okna › 67.10 Szyba przednia — Seria 450 (modele 3**, 400, 401, 402, 403, 414, 432, 433, 441, 442, 443, 452) · Seria 452 (modele 3**, 4**) · Seria 454 (modele 0**)

EinPAS 36 Widoczność › 36.15 Szyba szklana/ okno › 36.15.40 Szyba przednia — Seria 450 (modele 3**, 400, 401, 402, 403, 414, 432, 433, 441, 442, 443, 452) · Seria 452 (modele 3**, 4**) · Seria 454 (modele 0**)

AR67.10-P-1000-08FF

Apply adhesive material

Apply adhesive material

Intermediate piece

000 589 86 63 00

Repair materials

Number

Designation

Order number

BR00.45-Z-1141-02A

TS adhesive (with isopropanol cleaner)

A 451 989 00 71

Apply adhesive material
Apply adhesive material

N67.20-2000-01

Install windshield (3) on body flange within 2 minutes after applying adhesive material, to prevent adhesion problems of the adhesive material.

The curing time is approx. 2 h measured from the time the windshield (3) is installed. The rated accident strength is achieved only after approx. 8 h.

P67.10-2179-01

1 Guide nozzle (2) along bonding surface on windshield (3) or along residual adhesive material on body flange and uniformly apply adhesive material in shape of a bead with a height (b) of approx. 12 mm and a width of approx. 8 mm.

Cartridge gun
gotis://K_67.0_02.0

Completely press out adhesive material not used immediately after application (disposal).