ar6710d150301f

Install windshield

Typ ar · temat 67.10 · wersja 0201 · 2017-02-23

Dotyczy: Model 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 67 Szyby i okna › 67.10 Szyba przednia — Seria 909

EinPAS 36 Widoczność › 36.15 Szyba szklana/ okno › 36.15.40 Szyba przednia — Seria 909

AR67.10-D-1503-01F

Install windshield

Model

909

Modification notes

05.12.2016

Repair reference for 1-component adhesive replaced, work procedure and contents updated

Operation steps 1 to 5

Repair materials

Number

Designation

Order number

BR00.45-Z-1031-02A

Glazing repair kit 500662 01/03/05/07/09/11

A 973 670 00 93

BR00.45-Z-1180-02A

Repair kit for installing windshields, 1-component adhesive

A 000 670 01 00

Install windshield

1

Fasten cup suction tool on outside of windshield (1).


Commercially available devices/tools
Cup suction tool/shackle (for removing and installing windows)



2

Apply adhesive bead to a piece of cardboard at a length of approx. 15 cm.


When using 2-component adhesive.


When using 2-component adhesive, squeeze out the first 5  cm of the adhesive bead on a piece of paper, because the components of the adhesive are not mixed correctly at the beginning.


D67.10-1116-01

3

Apply adhesive bead with application nozzle starting at bottom in center of window directly on sealing frame (2).

When applying the adhesive bead should have the same height as the triangular application nozzle (approx. 14 mm). Guide application nozzle of cartridge gun to windshield (1) at right angle.
Otherwise the adhesive can be pressed out of the window edge when installing or leaktightness and strength are not ensured.

Install windshield (1) within 5 min when using 2-component adhesive and within 10 min when using 1-component adhesive.
Otherwise the adhesive effect may be impaired.

Install windshield

4

Allow end of adhesive bead to run out parallel to start of adhesive bead as shown.



5

Smooth adhesive bead to obtain uniform shape.


D67.10-1102-01

Install windshield

6

Lift windshield (1) and center over windshield cutout with strips of adhesive tape (arrows), carefully insert and press on.


The windshield (1) should only be pressed on by one person.
Otherwise the window can break if pressed on both sides simultaneously.


One window in the vehicle must be open.
Otherwise the windshield (1) can be pressed toward outside by the air when a door is closed.


It is no longer possible to move the windshield (1) after installation.
Curing time:
1-component adhesive min. 2 h.
2-component adhesive min. 1 h.


D67.10-1114-01