1 | Grind mating surfaces on inner rear roof frame (2) down to bare metal in crosshatched areas. |
Sand down spot weld flanges to bare metal on both sides. |
2 | Remove shavings and drill chips. |
3 | Coat insides of spot weld flanges with zinc dust paint. |
S65.20-4549-06
4 | Punch holes for MAG welding on outer rear roof frame (1) (areas A to D). |
S65.20-4534-06
5 | Grind mating surfaces down to bare metal in crosshatched areas and around holes. |
Sand down spot weld flanges to bare metal on both sides. |
6 | Remove shavings and drill chips. |
7 | Coat insides of spot weld flanges with zinc dust paint. |
S65.20-4535-04