MODEL | 415 |
S65.20-4500-09
1 | Expose and cut out spot welds on outer front roof frame (1) and inner front roof frame (2) (areas A, B, C, D, E and F). |
Cut out spot welds through two panel thicknesses (areas A, B, C and D). |
2 | Remove damaged outer front roof frame (1) and inner front roof frame (2). |
3 | Grind mating surfaces down to bare metal in the crosshatched areas. |
Sand down spot weld flanges to bare metal on both sides. |
4 | Remove shavings and drill chips. |
5 | Coat insides of spot weld flanges with zinc dust paint. |