Remove/install rear roof frame

AR65.20-P-1008MCD

Remove/install rear roof frame

14.05.2019

Model

451.3

Lower rear roof frame

1

Lower rear roof frame



Remove

 Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Measures for preventing damage to vehicles or components when performing electric welding work

AH00.00-N-0005-01A

Topical note

General information on body repair

AH60.00-N-0001-01A

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

General information on riveting

AH60.00-P-0003-01N

Notes on replacing body parts

AH60.00-P-0027-01FF

1

Remove detachable parts in the repair area

2

Cover all detachable parts remaining in vehicle (area to be repaired)


Use fire-resistant tarp
to prevent damage due to flying sparks.

3

Remove part of the side wall paneling

AR63.10-P-0115MCC

4

Remove rear lamp insert

AR64.20-P-1061MCC

5

Cut off top rear roof frame

AR65.20-P-1008MCC

6

Cut off bottom rear roof frame (1)

AR65.20-P-1008-01MCD

7

Prepare connecting points on body

AR65.20-P-1008-04MCD

Zinc dust paint suitable for spot welding

*BR00.45-Z-1001-07A

8

Prepare connecting points on the bottom rear roof frame (1)

AR65.20-P-1008-02MCD

Zinc dust paint suitable for spot welding

*BR00.45-Z-1001-07A



Install

9

Fit bottom rear roof frame (1) and weld in

AR65.20-P-1008-03MCD

10

Fit top rear roof frame and weld in

AR65.20-P-1008MCC

11

Install rear lamp insert

AR64.20-P-1061MCC

12

Install side wall paneling

AR63.10-P-0115MCC

13

Clean weld joints and sheet metal flanges with wire brush and clean repair areas

14

Prime repair area using primer filler

15

Supply standard seam seals with body sealant

AR97.10-P-4000MCC

White sealing compound, 310 ml, DBL 6069.20

*BR00.45-Z-1003-01A

16

Supplement standard underbody protection with permanent underfloor protection

Underfloor protection 800 ml

*BR00.45-Z-1001-05A

17

Paint repair area adjacent surfaces

Topical note

Notes on paintwork repairs

AH98.00-P-9408-02MCC

18

Add cavity preserving agent

AR97.20-P-1500FF

Teroson protective wax, art. no: 122.73Q

*BR00.45-Z-1008-05A

19

Reinstall all detachable parts removed

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-05A

Underfloor protection 800 ml

A 001 986 46 10

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

BR00.45-Z-1003-01A

White sealing compound, 310 ml, DBL 6069.20

A 001 989 63 20

BR00.45-Z-1008-05A

Teroson protective wax, art. no: 122.73Q

Henkel Loctite
www.Loctite.de