ar6520p100802mfa

Prepare rear roof frame for installation

Typ ar · temat 65.20 · wersja 0102 · 2019-07-23

Dotyczy: Model 177.0 Model 247.0/6/7

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 65 Dach › 65.20 Rama dachu — Seria 177 (modele 0**) · Seria 247 (modele 0**, 6**, 7**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.39 Dach › 35.39.30 Poszycie/rama dachu — Seria 177 (modele 0**) · Seria 247 (modele 0**, 6**, 7**)

AR65.20-P-1008-02MFA

Prepare rear roof frame for installation

Model

177.0

Model

247.0/6/7

Repair materials

Number

Designation

Order number

BR00.45-Z-1056-07A

1K-zinc dust paint

A 000 986 28 00

Further information can be found in the superordinate service document.
The safety information in the superordinate service document must be observed.

Prepare rear roof frame for installation

1

Grind down mating surfaces on lower rear roof frame (2) down to bare metal in the cross-hatched areas.


Grind spot weld flanges down to bare metal on both sides.



2

Remove shavings and drill chips.



3

Apply zinc dust paint to insides of spot weld flanges.


Do not coat bonding surfaces (area E) with zinc dust paint.
Otherwise adhesion problems can occur.


P65.20-2997-06

Prepare rear roof frame for installation

P65.20-2998-08

4

Grind upper rear roof frame (1) down to bare metal in the cross-hatched areas.

5

Remove shavings and drill chips.

6

Apply zinc dust paint to insides of spot weld flanges.

Do not coat bonding surfaces with zinc dust paint (F areas).
Otherwise adhesion problems can occur.