ar6510s576002a

Preparing rear part of roof paneling for installation

Typ ar · temat 65.10 · wersja 0100 · 2019-10-11

Dotyczy: Model 909 except code D03 (Roof and rear-end doors, high version)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 65 Dach › 65.10 Poszycie dachu — Seria 909

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.39 Dach › 35.39.30 Poszycie/rama dachu — Seria 909

AR65.10-S-5760-02A

Preparing rear part of roof paneling for installation

Model

909

except code D03 (Roof and rear-end doors, high version)

Repair materials

Number

Designation

Order number

BR00.45-Z-1056-07A

1K-zinc dust paint

A 000 986 28 00

The superordinate service document as well as the safety information in the service document must be observed.

Preparing rear part of roof paneling for installation

1

Grind mating surfaces on roof paneling rear section (1) down to bare metal in cross-hatched areas.


Sand down spot weld flanges to bare metal on both sides.



2

Zinc dust paint to insides of spot weld flanges.


Do not coat bonding surfaces with zinc dust paint (areas H).
Otherwise adhesion problems can occur.


Observe pretreatment of bonding surfaces.



3

Grind mating surfaces on the center section of the roof paneling (2) down to bare metal in cross-hatched areas.


Sand down spot weld flanges to bare metal on both sides.



4

Zinc dust paint to insides of spot weld flanges.


Do not coat bonding surfaces with zinc dust paint (areas H).
Otherwise adhesion problems can occur.


Observe pretreatment of bonding surfaces.


N65.10-A008-12