ar6510s100002c

Separate center roof paneling

Typ ar · temat 65.10 · wersja 0101 · 2013-06-15

Dotyczy: MODEL 415.601 without CODE DL2 (Ladder flap) MODEL 415.603 without CODE DL2 (Ladder flap) without CODE W27 (Fixed window, rear left) without CODE W28 (Fixed window at rear right) MODEL 415.605 without CODE W27 (Fixed window, rear left) without CODE W28 (Fixed window at rear right)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 65 Dach › 65.10 Poszycie dachu — Seria 415 (modele 601, 603, 605)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.39 Dach › 35.39.30 Poszycie/rama dachu — Seria 415 (modele 601, 603, 605)

AR65.10-S-1000-02C

Separate center roof paneling

MODEL

415.601

without CODE DL2 (Ladder flap)

MODEL

415.603

without CODE DL2 (Ladder flap)

without CODE W27 (Fixed window, rear left)

without CODE W28 (Fixed window at rear right)

MODEL

415.605

without CODE W27 (Fixed window, rear left)

without CODE W28 (Fixed window at rear right)

Separate center roof paneling

S65.10-4501-09

1

Expose spot welds on center roof paneling (1) and cut out (areas A and B).

Separate center roof paneling

S65.10-4507-09

2

Expose and cut out spot welds on center roof paneling (1) (areas C and D).

Separate center roof paneling

3

Heat center roof paneling (1) in crosshatched areas.


Crosshatched areas are bonded.


4

Remove damaged center roof paneling (1)

S65.10-4508-06

Separate center roof paneling

S65.10-4509-09

5

Cut back remaining adhesive on reinforcements.

6

Grind mating surfaces down to bare metal in the crosshatched areas.

Sand down spot weld flanges to bare metal on both sides.

7

Remove shavings and drill chips.

8

Coat insides of spot weld flanges with zinc dust paint.