ar6510p100003mfa
Prepare center roof paneling for installation
Typ ar · temat 65.10 · wersja 0105 · 2019-08-07
Dotyczy: Model 118.6 except code 413 (Automatic panoramic sliding sunroof) Model 177.0 except code 413 (Automatic panoramic sliding sunroof) Model 247.0/6/7 except code 413 (Automatic panoramic sliding sunroof)
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 3 Nadwozie › 65 Dach › 65.10 Poszycie dachu — Seria 118 (modele 6**) · Seria 177 (modele 0**) · Seria 247 (modele 0**, 6**, 7**)
EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.39 Dach › 35.39.30 Poszycie/rama dachu — Seria 118 (modele 6**) · Seria 177 (modele 0**) · Seria 247 (modele 0**, 6**, 7**)
AR65.10-P-1000-03MFA
| Prepare center roof paneling for installation
|
|
|
Model
| 118.6
|
|
| except code 413 (Automatic panoramic sliding sunroof)
|
Model
| 177.0
|
|
| except code 413 (Automatic panoramic sliding sunroof)
|
Model
| 247.0/6/7
|
|
| except code 413 (Automatic panoramic sliding sunroof)
|
Number
| Designation
| Order number
|
BR00.45-Z-1056-07A
| 1K-zinc dust paint
| A 000 986 28 00
|
The superordinate service document as well as the safety information in the service document must be observed.
The following operation steps are shown on model 177.0.
1
| Grind mating surfaces of the center roof paneling (1) in the cross-hatched areas down to bare metal on both sides (areas A and B).
|
2
| Drill holes for plug welds in center roof paneling (1) with Ø 6.7 mm (area C).
|
|
| Transfer holes from old part.
|
3
| Deburr holes for plug welds on the center roof paneling (1) on both sides.
|
4
| Remove grinding dust and drill chips.
|
5
| Coat insides of spot weld flanges with zinc dust paint.
|
