The following steps are shown on model 257 except for code 414 (sliding roof).
Observe the higher-level service document as well as the safety information in the service document.
1 | Prepare bonding surfaces on center roof paneling (1) down to bare metal in crosshatched areas (areas B). |
Observe processing specifications of adhesive. |
2 | Grind mating surfaces down to bare metal in remaining crosshatched areas. |
Sand down spot weld flanges to bare metal on both sides. |
3 | Remove grinding dust. |
4 | Coat insides of spot weld flanges with zinc dust paint. |
Do not coat bonding surfaces with zinc dust paint (areas A). |
Observe pretreatment of bonding surfaces. |
P65.10-3795-06