Spot weld milling cutter
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1004-20A | Hot-air gun |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P65.10-2783-07
1 Expose welds on center roof paneling (1)
(areas E, F, G and H).
2 Separate welds on center roof paneling (1)
(areas E, F, G and H).
P65.10-2779-09
3 Expose spot welds on center roof paneling (1) (areas A, B, C and D).
4 Cut out spot welds on center roof paneling (1) with spot weld milling cutter or spherical cutter
(areas A, B, C and D).
5 Heat center roof paneling (1) in shaded areas with hot air gun.
Shaded areas are glued.
6 Remove damaged center roof paneling (1)
P65.10-2786-09
7 Grind connection surfaces on body down to bare metal in shaded areas with round wire brush.
Grind spot weld flanges down to bare metal on both sides.
P65.10-2789-06
8 Grind connection surfaces on body down to bare metal in shaded areas with round wire brush.
Grind spot weld flanges down to bare metal on both sides.
9 Remove grinding and drill shavings with wet/dry vacuum cleaner.
10 Coat insides of spot weld flanges with zinc dust paint.