Spot weld milling cutter
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1004-20A | Hot-air gun |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P65.10-2806-09
1 Expose spot welds on center roof paneling (1) (areas A, B, C and D).
2 Cut out spot welds on center roof paneling (1) with spot weld milling cutter or Vario Drill spot weld cutter (areas A, B, C and D).
3 Heat center roof paneling (1) in shaded areas with hot air gun.
Shaded areas are glued.
4 Remove damaged center roof paneling (1)
P65.10-2807-09
5 Grind connection surfaces on body down to bare metal in shaded areas with round wire brush.
Grind spot weld flanges down to bare metal on both sides.
6 Remove grinding and drill shavings with wet/dry vacuum cleaner.
7 Coat insides of spot weld flanges with zinc dust paint.