Spot weld miller
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1004-20A | Hot-air gun | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P65.10-2268-08
1 Expose spot welds and cut out with spot weld cutter
(areas A, B, C and D).
P65.10-2277-09
2 Grind out welds (areas E and F).
The grinding work is illustrated on the left side of the vehicle. Right side of vehicle analog
3 Heat center roof paneling in shaded area with hot air gun (foamed area).
4 Remove center roof paneling.
P65.10-2278-08
View from front
5 Then grind connection surfaces to bare metal in shaded areas. Sand spot weld flanges to bare metal on both sides
6 Remove grinding and drilling chips with wet/dry vacuum cleaner.
View from rear
7 Coat insides of spot weld flanges with zinc dust paint.