Installing rear section of roof paneling

AR65.10-D-5760-03TS

Installing rear section of roof paneling

 Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Measures for preventing damage to vehicles or components when performing electric welding work

AH00.00-N-0005-01A



000 588 01 84 00 Welder

WS60.00-P-0021K



000 588 02 84 00 Welder

WS60.00-P-0022K

Model

907.6/7, 910.6

1

Install roof paneling rear section (1), fit and fix in place.

2

Roof paneling rear section (1)   (area G).

3.1

Model 907.6/7
except code D05 (Super-high roof)
except code D06 (Super-high roof painted in vehicle colour)
Model 910.6
Roof paneling rear section (1)   (area F).

 See Fig. A.

3.2

Model 907.6/7
with code D05 (Super-high roof)
Model 907.6/7
with code D06 (Super-high roof painted in vehicle colour)
Roof paneling rear section (1)   (area F).

 See Fig. B.

4

Roof paneling rear section (1)   (area E).

5

Face-grind inert-gas plug welds on roof paneling rear section (1) (area E).

6

Model 907.6/7
except code D05 (Super-high roof)
except code D06 (Super-high roof painted in vehicle colour)
Model 910.6
Face-grind inert-gas plug welds on roof paneling rear section (1) (area F).

 See Fig. A.

7

Face-grind inert gas welds on roof paneling rear section (1) (areas C and D).

8

Clean weld joints.

9

Remove shavings.