ar6510d576002ts

Preparing rear part of roof paneling for installation

Typ ar · temat 65.10 · wersja 0100 · 2017-11-02

Dotyczy: Model 907.6/7, 910.6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 65 Dach › 65.10 Poszycie dachu — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.39 Dach › 35.39.30 Poszycie/rama dachu — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR65.10-D-5760-02TS

Preparing rear part of roof paneling for installation

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Model

907.6/7, 910.6

Repair materials

Number

Designation

Order number

BR00.45-Z-1056-07A

1K-zinc dust paint

A 000 986 28 00

Preparing rear part of roof paneling for installation

D65.10-1365-07

1

Model 907.6/7
except code D05 (Super-high roof)
except code D06 (Super-high roof painted in vehicle colour)
Model 910.6
Punch holes for inert-gas plug welds on roof paneling rear section (1) (area H).

Transfer hole dimensions (area H) from vehicle.

2

Grind mating surfaces on roof paneling rear section (1) down to bare metal in cross-hatched areas.

Sand down spot weld flanges to bare metal on both sides.

3

Apply zinc dust paint to insides of spot weld flanges.

Powiązane dokumenty