ar6510d575003ts

Installing front section of roof paneling

Typ ar · temat 65.10 · wersja 0100 · 2017-11-02

Dotyczy: Model 907, 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 65 Dach › 65.10 Poszycie dachu — Seria 907 · Seria 910

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.39 Dach › 35.39.30 Poszycie/rama dachu — Seria 907 · Seria 910

AR65.10-D-5750-03TS

Installing front section of roof paneling

Danger

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

AS65.00-Z-0002-01A

Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Measures for preventing damage to vehicles or components when performing electric welding work

AH00.00-N-0005-01A

000 588 01 84 00 Welder

WS60.00-P-0021K

000 588 02 84 00 Welder

WS60.00-P-0022K

Model

907, 910

The following operation steps are shown on model 907.733 with code D03 (Roof and rear-end doors, high version).

Installing front section of roof paneling

D65.10-1349-09

1

Install roof paneling front section (1), fit and fix in place.

2

Roof paneling front section (1) (area G).

3

Roof paneling front section (1) (areas H and K).

4

Roof paneling front section (1) (areas I and J).

5

Face-grind inert-gas plug welds on roof paneling front section (1) (areas I and J).

6

Clean weld joints.

7

Remove shavings.

Powiązane dokumenty