Model | 907.6/7, 910.6 |
with code D03 (Roof and rear-end doors, high version) | |
except code T16 (Sliding door right) | |
Right side of vehicle | |
Model | 907.6/7, 910.6 |
with code D03 (Roof and rear-end doors, high version) | |
except code T19 (Sliding door left) | |
Left side of vehicle | |
Model | 907.6 |
with code D05 (Super-high roof) | |
except code T16 (Sliding door right) | |
Right side of vehicle | |
Model | 907.6 |
with code D05 (Super-high roof) | |
except code T19 (Sliding door left) | |
Left side of vehicle | |
Model | 907.6 |
with code D06 (Super-high roof painted in vehicle colour) | |
except code T16 (Sliding door right) | |
Right side of vehicle | |
Model | 907.6 |
with code D06 (Super-high roof painted in vehicle colour) | |
except code T19 (Sliding door left) | |
Left side of vehicle |
906 589 01 23 00
Set of templates
Additional information can be found in the superordinate service document.
The safety information in the superordinate KD document must be observed.
The next steps are shown on model 907.733 with code D03 (roof and rear-end doors, high version) except code T19 (left sliding door) on the left side of the vehicle and must be carried out in the same way for vehicles except code T16 (right sliding door) on the right side of the vehicle in the event of damage.
D65.10-1387-09
1 | Seam seal in hatched areas. |
2 | Install side roof paneling (1), align, and fix in place. |
Commercially available devices/tools |
To fit side roof paneling (1) with front side wall paneling, use set templates. |
3 | Side roof paneling (1) (areas A and B). |
4 | Clean weld joints. |
Commercially available devices/tools |
5 | Remove shavings. |
Commercially available devices/tools |
D65.10-1388-09
6 | Side roof paneling (1) (areas C and D). |
7 | Grind inert gas spot welds down flat (area C). |
Commercially available devices/tools |
8 | Clean weld joints. |
Commercially available devices/tools |
9 | Remove shavings. |
Commercially available devices/tools |