ar6510d103302ts

Prepare center side roof paneling for installation

Typ ar · temat 65.10 · wersja 0100 · 2018-06-07

Dotyczy: Model 907.6/7, 910.6 with code D03 (Roof and rear-end doors, high version) except code T16 (Sliding door right) Right side of vehicle Model 907.6/7, 910.6 with code D03 (Roof and rear-end doors, high version) except code T19 (Sliding door left) Left side of vehicle Model 907.6 with code D05 (Super-high roof) except code T16 (Sliding door right) Right side of vehicle Model 907.6 with code D05 (Super-high roof) except code T19 (Sliding door left) Left side of vehicle Model 907.6 with code D06 (Super-high r

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 65 Dach › 65.10 Poszycie dachu — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.39 Dach › 35.39.30 Poszycie/rama dachu — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR65.10-D-1033-02TS

Prepare center side roof paneling for installation

Model

907.6/7, 910.6

with code D03 (Roof and rear-end doors, high version)

except code T16 (Sliding door right)

Right side of vehicle

Model

907.6/7, 910.6

with code D03 (Roof and rear-end doors, high version)

except code T19 (Sliding door left)

Left side of vehicle

Model

907.6

with code D05 (Super-high roof)

except code T16 (Sliding door right)

Right side of vehicle

Model

907.6

with code D05 (Super-high roof)

except code T19 (Sliding door left)

Left side of vehicle

Model

907.6

with code D06 (Super-high roof painted in vehicle colour)

except code T16 (Sliding door right)

Right side of vehicle

Model

907.6

with code D06 (Super-high roof painted in vehicle colour)

except code T19 (Sliding door left)

Left side of vehicle

Additional information can be found in the superordinate service document.

The safety information in the superordinate KD document must be observed.

The next steps are shown on model 907.733 with code D03 (roof and rear-end doors, high version) except code T19 (left sliding door) on the left component part and must be carried out on vehicles except code T16 (right sliding door) in the event of damage to the right side of the vehicle.

Prepare center side roof paneling for installation

D65.10-1389-09

1

Mark separating point on side roof paneling (1) (area A).

Mark separating point along the edge (area A).

2

Disconnect separating point on side roof paneling (1) (area A).

Commercially available devices/tools
Body power jigsaw

3

Dispose of the leftover piece that has been separated off.

4

Punch holes on side roof paneling (1) with a diameter of 6 mm (areas B, C, and D).

Commercially available devices/tools
Hole punching pliers 6 mm

5

Grind side roof paneling (1) around holes (areas B, C, and D) down to bare metal.

Commercially available devices/tools
Rotary wire brush

6

Remove shavings.

Commercially available devices/tools
Wet and dry vacuum cleaner

Prepare center side roof paneling for installation

7

Punch holes in side roof paneling (1) with a diameter of 6 mm (area E).


Commercially available devices/tools
Hole punching pliers 6 mm



8

Grind side roof paneling (1) around holes (area E) down to bare metal.


Commercially available devices/tools
Rotary wire brush



9

Remove shavings.


Commercially available devices/tools
Wet and dry vacuum cleaner


D65.10-1390-06