Weld in rear side roof paneling.

AR65.10-D-1031-03TSB	Weld in rear side roof paneling.
	000 588 02 84 00 Welder		WS60.00-P-0022K

Model	907.6/7
	with code D03 (Roof and rear-end doors, high version)
	except code T16 (Sliding door right)
	Right side of vehicle
Model	907.6/7
	with code D03 (Roof and rear-end doors, high version)
	except code T19 (Sliding door left)
	Left side of vehicle
Model	907.6
	with code D05 (Super-high roof)
	except code T16 (Sliding door right)
	Right side of vehicle
Model	907.6
	with code D05 (Super-high roof)
	except code T19 (Sliding door left)
	Left side of vehicle
Model	907.6
	with code D06 (Super-high roof painted in vehicle colour)
	except code T16 (Sliding door right)
	Right side of vehicle
Model	907.6
	with code D06 (Super-high roof painted in vehicle colour)
	except code T19 (Sliding door left)
	Left side of vehicle
Model	910.6
	with code D03 (Roof and rear-end doors, high version)
	except code T16 (Sliding door right)
	Right side of vehicle
Model	910.6
	with code D03 (Roof and rear-end doors, high version)
	except code T19 (Sliding door left)
	Left side of vehicle

906 589 01 23 00

Set of templates

Repair materials

Number	Designation	Order number
BR00.45-Z-1107-01A	Black seam seal 300 ml	A 005 989 63 20

 Additional information can be found in the superordinate service document.

Safety information in the superordinate KD document must be observed.

 The next steps are shown on model 907.733 with code D03 (roof and rear-end doors, high version) except code T19 (left sliding door) on the left side of the vehicle and must be carried out in the same way for vehicles except code T16 (right sliding door) on the right side of the vehicle in the event of damage.

D65.10-1382-09

1	Seam seal in hatched areas.

2	Install side roof paneling (1), align and fix in place.

 Commercially available devices/tools
Clamping pliers (Standard)

 To fit the side roof paneling (1) to the rear side wall paneling, use  set of templates.

3	Side roof paneling (1)   (areas A and B).

4	Clean weld joints.

 Commercially available devices/tools
Rotary wire brush

5	Remove shavings.

 Commercially available devices/tools
Wet and dry vacuum cleaner

6	Tack side roof paneling (1)   (area E).

7	Side roof paneling (1)   (area C).

8	Weld in side roof paneling (1) with    (area D).

9	Surface grind inert gas spot welds (area C), inert gas tack welds (area E), and inert gas welds (area D).

 Commercially available devices/tools
Angular grinder

10	Clean weld joints.

 Commercially available devices/tools
Rotary wire brush

11	Remove shavings.

 Commercially available devices/tools
Wet and dry vacuum cleaner

D65.10-1370-06

Powiązane dokumenty