ar6510d102103ts

Install side roof paneling over sliding door

Typ ar · temat 65.10 · wersja 0100 · 2018-06-20

Dotyczy: Model 907.6/7, 910.6 with code T16 (Sliding door right) Right side of vehicle Model 907.6/7, 910.6 with code T19 (Sliding door left) Left side of vehicle

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 65 Dach › 65.10 Poszycie dachu — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.39 Dach › 35.39.30 Poszycie/rama dachu — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR65.10-D-1021-03TS

Install side roof paneling over sliding door

000 588 01 84 00 Welder

WS60.00-P-0021K

000 588 02 84 00 Welder

WS60.00-P-0022K

Model

907.6/7, 910.6

with code T16 (Sliding door right)

Right side of vehicle

Model

907.6/7, 910.6

with code T19 (Sliding door left)

Left side of vehicle

Additional information can be found in the superordinate service document.

Safety information in the superordinate KD document must be observed.

The next steps are shown on model 907.733 with code D03 (roof and rear-end doors, high version) and code T16 (right sliding door) on the right side of the vehicle and must be carried out in the same way for vehicles with code T19 (left sliding door) on the left side of the vehicle in the event of damage.

Install side roof paneling over sliding door

D65.10-1396-09

1

Install side roof paneling (1), fit, and fix in place.

Commercially available devices/tools
Clamping pliers (Standard)

2

Side roof paneling (1) (area A).

3

Tack side roof paneling (1) (areas B and C).

4

Side roof paneling (1) (areas D, E and F).

5

Surface grind inert gas tack welds (areas B and C) and inert gas spot welds (areas D, E, and F).

Commercially available devices/tools
Angular grinder

6

Clean weld joints.

Commercially available devices/tools
Rotary wire brush

7

Remove shavings.

Commercially available devices/tools
Wet and dry vacuum cleaner

Powiązane dokumenty