ar6500d1100ts

Remove, install stop plug in roof

Typ ar · temat 65.00 · wersja 0101 · 2019-04-30

Dotyczy: Model 907, 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 65 Dach › 65.00 Informacje ogólne — Seria 907 · Seria 910

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.25 Element tłumiący/okładzina dolna/uszczelnienie/osłona dolna › 35.25.30 Zaślepka/ tuleja/ podkładka — Seria 907 · Seria 910

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.39 Dach › 35.39.30 Poszycie/rama dachu — Seria 907 · Seria 910

AR65.00-D-1100TS

Remove, install stop plug in roof

29.04.2019

Model

907, 910

Remove, install stop plug in roof

D65.00-0010-08

Shown on model 907.733 with code D03 (Roof and rear-end doors, high version)

1

Plug

Remove, install stop plug in roof

D65.00-0009-08

Shown on model 907.733 with code D03 (Roof and rear-end doors, high version)

1

Plug

Danger

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

AS65.00-Z-0002-01A

Danger

Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors.

No smoking! No open fire! Use respiratory protection, protective clothing, gloves, safety glasses and protective skin cream. Ensure that the area is well ventilated.

AS98.00-Z-0002-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

General notes on touch-up applicators and paint spray cans

AH98.00-P-9409-06A

Remove

1

Remove detachable parts in area to be repaired

2

Partially cut off respective stop plug (1) from vehicle interior side such that it is flush with the roof

The number of stop plugs (1) can vary depending on the body.

3

Remove respective stop plug (1)

000 588 00 84 00 Heat gun

WS54.00-P-0049B


Do not heat respective stop plug (1) too much.
This prevents any damage to the paint.

Heat respective stop plug (1) from vehicle interior side and press out upward.

Clean

4

Clean sealing surface on roof.


Do not use moisturizing cleaning agents.
Prevents adhesion problems.

Install

5

Repair paint damage with brush or touch-up paint pen

If there is paint damage:

Use only paints or touch-up paint pens approved by Daimler AG:
http://xentryportal.mercedes-benz.com

6

Install respective stop plug (1)

000 588 00 84 00 Heat gun

WS54.00-P-0049B


Do not heat respective stop plug (1) too much.
This prevents any damage to the paint.

To do this, insert respective stop plug (1) into bore and heat evenly until sealing compound is viscous.

7

Press on respective stop plug (1) evenly with suitable tool

8

Paint over respective stop plug (1)

Use brush or touch-up paint pen for this.

Use only paints or touch-up paint pens approved by Daimler AG:
http://xentryportal.mercedes-benz.com

9

Install detachable parts in area to be repaired

Powiązane dokumenty