Prepare upper section on outer corner pillar paneling

AR64.30-D-5732-02TS

Prepare upper section on outer corner pillar paneling

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Model

907.6/7, 910.6

1

Mark separating point on outer corner pillar paneling upper section (1) (area A).

 Mark separating point along edge.

2

Cut separating point at outer corner pillar paneling upper section (1) (area A).

 Commercially available devices/tools
Body power jigsaw

3

Mark separating point on outer corner pillar paneling upper section (1) (area B).

 Take over dimension for separating point from vehicle.

4

Cut separating point at outer corner pillar paneling upper section (1) (area B).

 Commercially available devices/tools
Body power jigsaw

5

Dispose of cut-off pieces.

6

Punch holes in outer corner pillar paneling upper section (1) with Ø 6 mm (areas C and D).

 Commercially available devices/tools
Hole punching pliers

7

Grind mating surfaces in cross-hatched areas and around holes (areas C and D) down to bare metal.

 Commercially available devices/tools
Rotary wire brush

8

Remove shavings.

 Commercially available devices/tools
Wet and dry vacuum cleaner