AR64.30-D-0851-02TS | Install mounting support for rear-end door hinge | ||
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Measures for preventing damage to vehicles or components when performing electric welding work | ||
| 000 588 01 84 00 Welder |
The following steps are shown on the left side of the vehicle and must be accomplished analogously on the right side in the event of damage.
1 | Install mounting console (1), fit and fix in place. |
2 | Mounting support (1) (areas A, B, and C). |
3 | Clean weld joints. |
4 | Remove shavings. |
D64.30-1204-06
Powiązane dokumenty
- ah0000n000501a Zabezpieczenia zapobiegające uszkodzeniom pojazdu lub jego elementów podczas spawania elektrycznego
- as0000z000701a Zagrożenie dla życia przez wysokie napięcie przy spawaniu elektrycznym. Niebezpieczeństwo wybuchu podczas spawania w pobliżu materiałów łatwopalnych. Niebezpieczeństwo urazu na skutek odprysków przy spawaniu oraz promieniowania u
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.
- ws6000p0021k