ar6420s112003ea

Weld in inner section of end crossmember

Typ ar · temat 64.20 · wersja 0102 · 2016-05-25

Dotyczy: Model 447.6 Model 447.7 except code UR1 (Seat rail system with quick-release attachment system) except code UR3 (Seat mount with quick fastener (2 passenger seat rows)) except code UR6 (Rear seats with quick-release locks (1st row)) except code ZU4 (Production Argentina) Model 448.7 except code UR1 (Seat rail system with quick-release attachment system) except code UR3 (Seat mount with quick fastener (2 passenger seat rows))

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 64 Ściana tylna i tył pojazdu › 64.20 Tył pojazdu — Seria 447 (modele 6**, 7**) · Seria 448 (modele 7**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.31 Ściana tylna/ tył pojazdu › 35.31.30 Ściana tylna/ tył pojazdu — Seria 447 (modele 6**, 7**) · Seria 448 (modele 7**)

AR64.20-S-1120-03EA

Weld in inner section of end crossmember

Model	447.6
Model	447.7
	except code UR1 (Seat rail system with quick-release attachment system)
	except code UR3 (Seat mount with quick fastener (2 passenger seat rows))
	except code UR6 (Rear seats with quick-release locks (1st row))
	except code ZU4 (Production Argentina)
Model	448.7
	except code UR1 (Seat rail system with quick-release attachment system)
	except code UR3 (Seat mount with quick fastener (2 passenger seat rows))

Weld in inner section of end crossmember

447 589 01 23 00

Locating tool

Weld in inner section of end crossmember

1	Install crossmember inner section (1) and lower corner pillar reinforcement with  locating tool, fit and fix in place.

2	Crossmember inner section (1)   (areas A to C).

 Spot weld area A only in accessible area.

3	Remove lower corner pillar reinforcement and  locating tool.

S64.20-4696-06

Weld in inner section of end crossmember

4	Complete crossmember inner section (1)   (area A).

5	Crossmember inner section (1)   (areas D to G).

6	Crossmember inner section (1)   (areas H and I).

 Inert gas weld in intervals and allow to cool down in between. Reduces heat distortion.

7	Clean weld joints.

8	Remove shavings.

S64.20-4697-06

9	Coat welding areas no longer accessible after installing bottom corner pillar reinforcement and crossmember outer section, clean and coat with zinc dust paint.