ar6420s112002e

Prepare end crossmember inner section for installation

Typ ar · temat 64.20 · wersja 0102 · 2016-05-25

Dotyczy: Model 447.7 with code UR1 (Seat rail system with quick-release attachment system) Model 447.7 with code UR3 (Seat mount with quick fastener (2 passenger seat rows)) Model 447.7 with code UR6 (Rear seats with quick-release locks (1st row)) Model 447.7 with code ZU4 (Production Argentina) Model 447.8 Model 448.7 with code UR1 (Seat rail system with quick-release attachment system) Model 448.7 with code UR3 (Seat mount with quick fastener (2 passenger seat rows)) Model 448.8

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 64 Ściana tylna i tył pojazdu › 64.20 Tył pojazdu — Seria 447 (modele 7**, 8**) · Seria 448 (modele 7**, 8**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.31 Ściana tylna/ tył pojazdu › 35.31.30 Ściana tylna/ tył pojazdu — Seria 447 (modele 7**, 8**) · Seria 448 (modele 7**, 8**)

AR64.20-S-1120-02E

Prepare end crossmember inner section for installation

Model

447.7

with code UR1 (Seat rail system with quick-release attachment system)

Model

447.7

with code UR3 (Seat mount with quick fastener (2 passenger seat rows))

Model

447.7

with code UR6 (Rear seats with quick-release locks (1st row))

Model

447.7

with code ZU4 (Production Argentina)

Model

447.8

Model

448.7

with code UR1 (Seat rail system with quick-release attachment system)

Model

448.7

with code UR3 (Seat mount with quick fastener (2 passenger seat rows))

Model

448.8

Prepare end crossmember inner section for installation

1

Crossmember inner section

S64.20-4686-06

Prepare end crossmember inner section for installation

1

Crossmember inner section

S64.20-4687-06

1.1

If the inner rear longitudinal member and rear longitudinal frame member are not removed.
Expose spot welds on crossmember inner section (1) and cut out (area A).

1.2

If the inner rear longitudinal member and rear longitudinal frame member are removed.
Sand down mating surfaces to bare metal in crosshatched areas .

Sand down spot weld flanges to bare metal on both sides.

2

Remove shavings and drill chips.

3

Coat insides of spot weld flanges with zinc dust paint.

Prepare end crossmember inner section for installation

S64.20-4643-09

4

Sand down mating surfaces to bare metal in crosshatched areas .

Sand down spot weld flanges to bare metal on both sides.

5

Remove shavings and drill chips.

6

Coat insides of spot weld flanges with zinc dust paint.