ar6420s112001ea

Cut off inner part of end cross member

Typ ar · temat 64.20 · wersja 0101 · 2016-05-25

Dotyczy: Model 447.6 Model 447.7 except code UR1 (Seat rail system with quick-release attachment system) except code UR3 (Seat mount with quick fastener (2 passenger seat rows)) except code UR6 (Rear seats with quick-release locks (1st row)) except code ZU4 (Production Argentina) Model 448.7 except code UR1 (Seat rail system with quick-release attachment system) except code UR3 (Seat mount with quick fastener (2 passenger seat rows))

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 64 Ściana tylna i tył pojazdu › 64.20 Tył pojazdu — Seria 447 (modele 6**, 7**) · Seria 448 (modele 7**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.31 Ściana tylna/ tył pojazdu › 35.31.30 Ściana tylna/ tył pojazdu — Seria 447 (modele 6**, 7**) · Seria 448 (modele 7**)

AR64.20-S-1120-01EA

Cut off inner part of end cross member

Model

447.6

Model

447.7

except code UR1 (Seat rail system with quick-release attachment system)

except code UR3 (Seat mount with quick fastener (2 passenger seat rows))

except code UR6 (Rear seats with quick-release locks (1st row))

except code ZU4 (Production Argentina)

Model

448.7

except code UR1 (Seat rail system with quick-release attachment system)

except code UR3 (Seat mount with quick fastener (2 passenger seat rows))

Cut off inner part of end cross member

S64.20-4692-09

1

Expose spot welds on crossmember inner section (1) and cut out (areas A to E).

Cut off inner part of end cross member

2

Expose spot welds on crossmember inner section (1) and cut out (areas F and G).


Cut out spot welds through two sheet metal thicknesses (arrows).



3

Expose inert gas weld on crossmember inner section (1) and cut (areas H and I).



4

Remove damaged crossmember inner section (1).


S64.20-4693-06

Cut off inner part of end cross member

5

Sand down mating surfaces to bare metal in crosshatched areas .


Sand down spot weld flanges to bare metal on both sides.



6

Remove shavings and drill chips.



7

Coat insides of spot weld flanges with zinc dust paint.


S64.20-4694-06