ar6350s622101c

Partially cut off outer wheel arch flaring

Typ ar · temat 63.50 · wersja 0100 · 2012-10-22

Dotyczy: MODEL 415

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.50 Błotnik tylny — Seria 415

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.41 Belka/ nadkole — Seria 415

AR63.50-S-6221-01C

Partially cut off outer wheel arch flaring

MODEL

415

Partially cut off outer wheel arch flaring

S63.50-4500-09

1

Expose spot welds on wheel arch flaring (1) and cut out (areas A, B and C).

2

Remove section from wheel arch flaring (1).

3

Expose spot welds on wheel arch flaring (1) and cut out (areas D and E).

Partially cut off outer wheel arch flaring

S63.50-4501-09

4

Mark separating points on wheel arch flaring (1) and cut (area F).

Partially cut off outer wheel arch flaring

5

Expose spot welds on wheel arch flaring (1) and cut out (areas G and H).


6

Disconnect riveted joints on wheel arch flaring (1) (areas I and J).


7

Remove damaged wheel arch flaring (1).

S63.50-4502-04

Partially cut off outer wheel arch flaring

S63.50-4503-09

8

Grind mating surfaces down to bare metal in the cross-hatched areas.

Sand down spot weld flanges to bare metal on both sides.

9

Remove shavings and drill chips.

10

Coat insides of spot weld flanges with zinc dust paint.