ar6350p145002rk

Partially prepare rear fender

Typ ar · temat 63.50 · wersja 0102 · 2018-09-14

Dotyczy: Model 231

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.50 Błotnik tylny — Seria 231

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.35 Błotnik/ ściana boczna — Seria 231

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.37 Błotnik › 35.37.31 Błotnik tylny — Seria 231

AR63.50-P-1450-02RK

Partially prepare rear fender

Model

231

Partially prepare rear fender

P63.50-3836-08

1

Separate self-piercing rivets from rear fender (1) (areas A and B).

Drill self-piercing riveting with Ø 4 mm bit.

2

Separate weld seams on rear fender (1) (areas C and D).

Partially prepare rear fender

P63.50-3837-08

3

Heat rear fender (1) in crosshatched areas.

Cross-hatched areas are bonded.

4

Remove mount for taillamp (3) and connecting panel (2) and dispose of.

Partially prepare rear fender

P63.50-3838-09

5

Grind mating surfaces on rear fender (1) down to bare metal in crosshatched areas on inside.

Observe pretreatment of bonding surfaces.

6

Grind mating surfaces on rear fender (1) down to bare metal on both sides (areas A).