ar6350d622002fa

Prepare outer wheel arch flaring for installation

Typ ar · temat 63.50 · wersja 0100 · 2013-11-20

Dotyczy: MODEL 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.50 Błotnik tylny — Seria 909

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.41 Belka/ nadkole — Seria 909

AR63.50-D-6220-02FA

Prepare outer wheel arch flaring for installation

MODEL

909

Prepare outer wheel arch flaring for installation

1

Drill Ø 6 mm holes in outer wheel arch flaring (1) in crosshatched areas (4, 5 and 6) at a hole interval of 15 mm.


2

Uniformly drill three Ø 6 mm holes in outer wheel arch flaring (1) in crosshatched areas (7 and 8).


3

Grind outer wheel arch flaring (1) down to bare metal in crosshatched areas (4, 5, 6, 7 and 8)..

D63.50-0005-06

Prepare outer wheel arch flaring for installation

4

Drill two Ø 6 mm holes in outer wheel arch flaring (1) on right and left in crosshatched area (9) at a hole interval of 15 mm (arrows).


5

Grind outer wheel arch flaring (1) down to bare metal in crosshatched area (9).


6

Grind outer wheel arch flaring (1) down to bare metal in crosshatched area (10) and coat from inside with zinc dust paint.


7

Remove grinding dust and drill chips.

D63.50-0006-05