Prepare outer wheel arch flaring for installation

Typ ar · temat 63.50 · wersja 0100 · 2006-10-31

Dotyczy: MODEL 903.66 /67, 904.66 with CODE (ZU9) National version for Mexico with CODE (RA5) 16 inch wheels MODEL 903.66 /67, 904.66 with CODE (ZU7) National version for Canada with CODE (RA5) 16 inch wheels MODEL 903.66 /67, 904.66 with CODE (ZU8) National version for USA with CODE (RA5) 16 inch wheels

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.50 Błotnik tylny — Seria 903 (modele 66*, 67*) · Seria 904 (modele 66*)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.41 Belka/ nadkole — Seria 903 (modele 66*, 67*) · Seria 904 (modele 66*)

AR63.50-D-6220-02B

Prepare outer wheel arch flaring for installation

Workshop equipment

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-07A	Zinc dust paint suitable for spot welding	A 000 986 34 42

Prepare outer wheel arch flaring for installation

D63.50-0012-11

1 Punch one dia. 6 mm hole each in areas (5 and 6) (arrows) .

2 Uniformly punch three dia. 6 mm holes in area (7)
 (arrows).

3 Grind outer wheel arch flaring (1) down to bare metal in marked area (4) and coat with zinc dust paint.

4 Grind outer wheel arch flaring (1) down to bare metal on both sides in marked areas (5, 6, 7 and 8) and coat with zinc dust paint.

D63.50-0013-04

5 Grind outer wheel arch flaring (1) down to bare metal on both sides in marked areas (9 and 10) and coat with zinc dust paint.