ar6340s119003c

Install cross member below front seat

Typ ar · temat 63.40 · wersja 0100 · 2012-09-14

Dotyczy: MODEL 415

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.40 Podłoga główna — Seria 415

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.41 Belka/ nadkole — Seria 415

AR63.40-S-1190-03C

Install cross member below front seat

MODEL

415

Install cross member below front seat

S63.40-4531-09

1

Install crossmember below front seat (1), fit and fix in place.

2

Drill Ø 6.7 mm rivet holes in crossmember under front seat (1) (areas A, B, C and D).

3

Remove crossmember below front seat (1).

4

Deburr both sides of rivet holes in crossmember under front seat (1) (areas A, B, C and D).

5

Remove drilling chips.

6

Coat insides of riveted joints with zinc dust paint.

Install cross member below front seat

S63.40-4532-09

7

Install crossmember under front seat (1) and fix in place.

8

Crossmember under front seat (1) (areas E, F, G and H).

9

Crossmember under front seat (1) (areas I, J, K, L , M and N).

10

Rivet crossmember under front seat using Ø 6.414 rivets (areas A, B, C and D).

Install cross member below front seat

S63.40-4533-09

11

Crossmember under front seat (1) (area O).

12

Crossmember under front seat (1) (area P).

13

Clean weld joints.

14

Remove shavings and drill chips.