ar6340s119002c

Prepare cross member below front seat

Typ ar · temat 63.40 · wersja 0100 · 2012-09-14

Dotyczy: MODEL 415

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.40 Podłoga główna — Seria 415

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.41 Belka/ nadkole — Seria 415

AR63.40-S-1190-02C

Prepare cross member below front seat

MODEL

415

Prepare cross member below front seat

S63.40-4529-09

1

Drill holes for MAG welding in crossmember under front seat (1) (areas A, B, C, D, E and F).

2

Grind mating surfaces on crossmember under front seat (1) down to bare metal in cross-hatched areas and around holes (areas A, B, C, D, E and F).

Prepare cross member below front seat

3

Drill holes for MAG welding in crossmember under front seat (1) (area G).


4

Grind mating surfaces on crossmember under front seat (1) down to bare metal in cross-hatched areas and around holes (area G).


Sand down spot weld flanges to bare metal on both sides.


5

Remove shavings and drill chips.


6

Coat insides of spot weld flanges with zinc dust paint.

S63.40-4530-06