ar6330s116403p

Install longitudinal member inner shell on entry

Typ ar · temat 63.30 · wersja 0300 · 2019-05-20

Dotyczy: Model 470, 471

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.30 Podłużnica na zewnątrz — Seria 470 · Seria 471

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.41 Belka/ nadkole — Seria 470 · Seria 471

AR63.30-S-1164-03P

Install longitudinal member inner shell on entry

Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Measures for preventing damage to components when performing electric welding and soldering work

AH60.00-P-0001-02A

000 588 02 84 00 Welder

WS60.00-P-0022K

Model

470, 471

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

The following steps are shown on the left side of the vehicle and must be performed analogously on the right side in the event of damage.

Install longitudinal member inner shell on entry

S63.30-4801-09

1

Install and fit longitudinal member inner shell in entrance (1).

Commercially available devices/tools
Clamping pliers (Standard)

2

Longitudinal member inner shell in entrance (1) (areas A, B, C, D and E).

3

Surface-grind inert-gas spot welds (areas A, B, C, D and E).

Commercially available devices/tools
Angular grinder

Install longitudinal member inner shell on entry

4

Screw in screw/bolts (2).



5

Longitudinal member inner shell in entrance (1) (areas F and G).



6

Longitudinal member inner shell in entrance (1) (area H).



7

Surface-grind inert-gas weld (area H) and inert-gas spot welds (areas F and G).


Commercially available devices/tools
Angular grinder



8

Clean all weld joints.


Commercially available devices/tools
Rotary wire brush


S63.30-4802-06

9

Remove shavings.

Commercially available devices/tools
Wet and dry vacuum cleaner

10

Apply zinc dust paint to weld joints onto connecting flanges that are no longer accessible after installing side roof paneling .

Powiązane dokumenty