ar6330s110202e
Prepare longitudinal member outer shell on rocker panel for installation
Typ ar · temat 63.30 · wersja 0101 · 2016-05-12
Dotyczy: Model 447, 448
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.30 Podłużnica na zewnątrz — Seria 447 · Seria 448
EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.41 Belka/ nadkole — Seria 447 · Seria 448
AR63.30-S-1102-02E
| Prepare longitudinal member outer shell on rocker panel for installation
|
|
|
1
| Mark separating points on new longitudinal member outer shell (1) and cut (areas A and B).
|
|
| Take separation points from vehicle.
|
2
| Punch holes for MAG welding on longitudinal member outer shell (2) (area C).
|
3
| Grind mating surfaces on longitudinal member outer shell (2) down to bare metal on crosshatched areas around holes (area C).
|
4
| Remove shavings and drill chips.
|
5
| Coat insides of spot weld flanges with zinc dust paint.
|
