ar6330s110201e

Remove longitudinal member outer shell on entrance

Typ ar · temat 63.30 · wersja 0101 · 2016-05-30

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.30 Podłużnica na zewnątrz — Seria 447 · Seria 448

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.41 Belka/ nadkole — Seria 447 · Seria 448

AR63.30-S-1102-01E

Remove longitudinal member outer shell on entrance

Model

447, 448

Remove longitudinal member outer shell on entrance

S63.30-4754-09

a

Dimension 25 mm

b

Dimension 60 mm

1

Mark separating points on longitudinal member outer shell (1) and cut (areas A and B).

Do not make the cuts too deep.
Otherwise the components below can be damaged and weakened.

2

Expose spot welds on longitudinal member outer shell (1) and cut out (areas C bis F).

3

Remove longitudinal member outer shell (1).

Remove longitudinal member outer shell on entrance

4

Remove residues from soundproofing.



5

Sand down mating surfaces to bare metal in crosshatched areas .


Sand down spot weld flanges to bare metal on both sides.



6

Remove shavings and drill chips.



7

Coat insides of spot weld flanges with zinc dust paint.


S63.30-4755-06