Prepare side longitudinal member paneling complete
Model
118.3/6
Model
177.0/1/9
Model
247.0
Repair materials
Number
Designation
Order number
BR00.45-Z-1056-07A
1K-zinc dust paint
A 000 986 28 00
The following operation steps are shown on the left side of the vehicle. In case of damage on the right side of the vehicle, these steps must be performed analogously. The higher-level service document as well as the safety information in the service document must be observed.
P63.30-3181-08
1
Mark separating points on side longitudinal member paneling (1) and disconnect (areas A, B, and C).
Transfer separation points from vehicle.
P63.30-3182-08
2
Grind mating surfaces on side longitudinal member paneling (1) in the cross-hatched area down to bare metal.
Sand down spot weld flanges to bare metal on both sides.
3
Remove grinding dust.
4
Apply zinc dust paint to insides of spot weld flanges. parts kit.
