ar6330d000402fa
Prepare outer sliding door entrance for welding in
Typ ar · temat 63.30 · wersja 0100 · 2013-11-21
Dotyczy: MODEL 909
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.30 Podłużnica na zewnątrz — Seria 909
EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.20 Kabina kierowcy/ karoseria › 35.20.50 Wejście — Seria 909
AR63.30-D-0004-02FA
| Prepare outer sliding door entrance for welding in
|
|
|
1
| Mark holes at rear of outer sliding door entrance (1).
|
|
| Dimensions:
a = 10 mm
b = 20 mm
c = 17 mm
d = 27 mm
e = 95 mm
f =17 mm
g = 35 mm
h = 7 mm
i = 27 mm
|
2
| Mark holes at front of outer sliding door entrance (1).
|
|
| Dimensions:
j = 12 mm
k = 30 mm
l = 52 mm
m = 9 mm
n = 15 mm
o = 15 mm
p = 40 m
q = 60 mm
|
3
| Drill Ø 6 mm holes at marked points.
|
4
| Grind outer sliding door entrance (1) down to bare metal in area of drilled holes.
|
5
| Grind outer sliding door entrance (1) down to bare metal in crosshatched area (4).
|
|
| Sand down spot weld flanges to bare metal on both sides.
|
6
| Remove grinding dust and drill chips.
|
7
| Coat inside of spot welding flanges with zinc dust paint.
|
