AR63.30-D-0003-03TS | Partially install door frame paneling lower section | ||
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Measures for preventing damage to vehicles or components when performing electric welding work | ||
| 000 588 01 84 00 Welder | ||
| 000 588 02 84 00 Welder |
The next steps are shown on the left side of the vehicle for model 910.631 with code D03 (Roof and rear-end doors, high version) and must be performed in a similar way in the event of damage on the right side of the vehicle.
1 | Install, align and fix lower section of door frame paneling (1) in place. |
2 | Lower section of door frame paneling (1) (areas C and D). |
D63.30-0325-10
3 | Lower section of door frame paneling (1) (areas A and B). |
4 | Grind MIG welds down flat (areas A and B). |
5 | Clean weld joints. |
6 | Restore surfaces and smooth (areas A and B). |
Different methods can be used to restore the surfaces. |
7 | Remove shavings. |
D63.30-0323-06
Powiązane dokumenty
- ah0000n000501a Zabezpieczenia zapobiegające uszkodzeniom pojazdu lub jego elementów podczas spawania elektrycznego
- as0000z000701a Zagrożenie dla życia przez wysokie napięcie przy spawaniu elektrycznym. Niebezpieczeństwo wybuchu podczas spawania w pobliżu materiałów łatwopalnych. Niebezpieczeństwo urazu na skutek odprysków przy spawaniu oraz promieniowania u
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.
- ws6000p0021k
- ws6000p0022k