1 | Mark separation line (2) at a distance of a = 35 mm, measured from center of hole (3) and in center of bead (arrow B) on door frame paneling (4). |
2 | Mark separation line (5) at a distance of b = 120 mm, measured from edge (arrow C) on door frame paneling (4). |
3 | Separate front wheel paneling section (1) along marked separation lines (2, 5). |
D61.20-0010-06
4 | Grind front wheel paneling section (1) down to bare metal in marked areas on both sides and coat with . |
D61.20-0011-06